Meraki

danatyler · ‎Jul 15 2024

It's a poor design to have something of that weight and depth relying on 1RU of front mounting. Will it hold: Yes. Will is sag/slope: Yes. Will it look bad: Yes

cmr · ‎Apr 30 2024

Make sure the core is in single instance spanning tree mode, that is usually the cause of problems. The other is not having VLAN1 trunked or with the C9300 having VLANs over number 1000

Cjowi · ‎Mar 17 2024

Hi, just checking if you ever got a solution for this issue. I am curious to understand how it was resolved. Thanks.

alemabrahao · ‎Feb 16 2024

I think it would be better to check directly on the Marketplace. https://apps.meraki.io/en-US/apps/381444/analytiks-trends

PhilipDAth · ‎May 11 2023

Haha. Spotify wouldn't own the rights to onsell the music for such a scenario.

Chrisvalenzuela · ‎Apr 21 2023

Lo puedes bloquear con la opción " http Hostname" agregar la url de tiktok.com vuelves a agregar otra regla de http hostname y agregas las dirección ip publicas del sitio de tiktok.com para que no se lleguen por ningún medio dentro de la red local Inalambrica o cableada. Una vez aplicas ese cambio esperas la propagación en el dashboard de meraki y pruebas si se denegó el acceso al sitio tiktok y su app en teléfono móviles.

AmyReyes · ‎Mar 21 2023

Hi @NetworkDemon I sent you a link via Postal.io to confirm your mailing address and claim your prize. It looks like that link has since expired. I'll connect with you via DM to get your information and resend it!

Robert_Burgoyne · ‎Mar 1 2023

Hello David, Thank you for the info about MA-CBL-LEAK-2. Can we assume that the entirety of the braided dark gray and white cable is a sensor? I’m trying to understand MA-CBL-LEAK-1, with the same braided dark gray and white cable. If I lay out 6’ of the MA-CBL-LEAK-1 cable on a flat surface, with multiple potential water leak points above, is the entirety of the 6’ length the sensor, giving me full coverage for the 6’ ? Thank you.

ChrisAtPE · ‎Feb 8 2023

We are having this issue, has anyone found a resolution to it?

AxL1971 · ‎Feb 8 2023

yes they do, we ordered a MS 250 switch and our supplier sent us the non POE version of the switch, in the end we had to buy POE injectors from Amazon to power the MR56 AP's now waiting on supplier to send us a POE capable Meraki switch

PhilipDAth · ‎Dec 28 2022

What does the local status page of the AP say when it is not connected? Do the APs definitely have correctly configured and working DNS servers? Is there any firewall that could be blocking their traffic?

EJN · ‎Dec 26 2022

I renamed the SSID adding the word Old, and created a new one with the same name/pw and settings. iPhones able to connect again (automatically since name and pw match what's saved within iOS settings). Don't know what could have triggered this, but not going to research further unless it happens again.

Shawn_Kingston · ‎Dec 15 2022

Yeap, the upgrade to 28.7.1 fixed it for us.

Ryan_Miles · ‎Dec 2 2022

You're running 4.20 which is now deprecated. You may want to test the current beta 5.0 which has a number of fixes. Support is going to advise you either run the latest stable, RC, or beta. In general, software engineering will usually never focus on troubleshooting deprecated firmware and rather will ask to start from a current firmware build/train.

Ivonne20 · ‎Dec 2 2022

disculpa cuanta potencia le pongo asi lo tengo yo 😞

PhilipDAth · ‎Nov 14 2022

I would try: * Temporarily removing the cable to the NetGear and then plugging it in. * Power cycle the NetGear. The problem is most likely transient. There is a slim chance it is the cable, or you have a damaged switch port.

Polymathink · ‎Nov 1 2022

I'd like to thank the academy....Hey, is this thing on?

JesseN · ‎Oct 27 2022

Yes, we tested and pushed out a fix for this yesterday afternoon. I have been testing with partners today to make sure that there are no edge cases. Thank you for testing!

Gsintes · ‎Oct 26 2022

Ya han corregido el bug!!! A partir de ahora toca pagar licencias!!! 😆

BlakeRichardson · ‎Oct 26 2022

@CharlesJN Awesome glad that you got a resolution. Very surprised it failed like that, all of the Meraki products I have handled have always been well designed and built.

alemabrahao · ‎Oct 20 2022

Great, but it looks more like a behavior on MAC devices than some problem It relates to the firmware of the access points, but the important thing is that it was solved.

Keith_Li · ‎Oct 10 2022

problem has resolved by replaced lan cable, thanks

WTorres · ‎Oct 9 2022

This is a High School. We created a Guest SSID with a different VLAN just for them with limited bandwidth for their personal devices. I agree this is a very high number hence, I'm looking to put in place all the relevant advise I can find in this community. Thank you for input!

Enzoly · ‎Oct 7 2022

Gracias EJN por tu apoyo. Los equipos son Meraki MR57 son nuevos. Dentro de mi red no tengo DHCP, por eso me ha costado asignarle una IP al AP. Tuve que montar el rol de DHCP para que los equipos tomaran ip y despues se la cambie or otra IP que se le hiba asignar. Ya puede resolver. La idea era asignarle la direccion IP por medio del puerto... Muchas gracias por contestar...

KarstenI · ‎Oct 1 2022

Yes, it will save the power. This is my power meter for my server and Lab-Switch. The spike is caused by powering up five APs and an IP-phone which pushes the consumption from 112W to 162W: Before After SW-Lab-c3560cx#show power inline Available:240.0(w) Used:127.1(w) Remaining:112.9(w) Interface Admin Oper Power Device Class Max (Watts) --------- ------ ---------- ------- ------------------- ----- ---- Gi0/1 auto on 29.9 AIR-AP3802I-E-K9 4 30.0 Gi0/2 auto off 0.0 n/a n/a 30.0 Gi0/3 auto on 26.6 AIR-AP2802I-E-K9 4 30.0 Gi0/4 auto on 15.4 AIR-CAP1702I-E-K9 4 30.0 Gi0/5 auto on 26.6 AIR-AP2802I-E-K9 4 30.0 Gi0/6 auto on 16.8 AIR-AP2702I-UXK9 4 30.0 Gi0/7 auto off 0.0 n/a n/a 30.0 Gi0/8 auto on 11.8 IP Phone 9971 4 30.0

About EJN

EJN

Esteban Nunez

Community Record

Badges