- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Using Meraki GR12 AP's with other brand routers in large home (3500sq')
I just switched to Meraki GR12 AP's in my home as a recommendation from a friend. I bought the Meraki RX50 router/firewall, but it throttles my speeds at 500MB. I work from home and need to have my full Gigabit speeds. What brand/type router/firewall is recommended or will work with my GR12's? I don't want to change out the entire system.
Thank you!!
- Labels:
-
Installation
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
If you're referring to the Meraki Go Indoor WiFi 6 AP (GR12) you may want to post in the specific Meraki Go Community: https://community.meraki.com/t5/Meraki-Go-Community/ct-p/go
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes, sorry I will update the post and move it
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am curious if you have recommendations for a Cisco router/firewall for my home, to keep it all in the "family" if you will.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @ddresen the RX series like most Cisco SMB products are a good idea but certainly come with their limitations.
Personally, I’ve used a Meraki MX at home for years with no issues.
https://www.linkedin.com/in/darrenoconnor/
I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@DarrenOC Which Meraki MX system do you use? I need to take advantage of the Gig ISP I subscribe to.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @ddresen , I’m using an MX68 but I don’t have a 1Gbps connection.
in your case you’re looking at the MX75 and above:
https://meraki.cisco.com/product-collateral/mx-family-datasheet/?file
https://www.linkedin.com/in/darrenoconnor/
I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Do you by any chance work for a Cisco Partner? If so, make use of their NFR programme.
https://www.linkedin.com/in/darrenoconnor/
I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I also second the MX75 assuming it's within budget.
One thing to remember is that as opposed the Meraki Go, standard Meraki devices require a license which you need to continue renewing in order to use the equipment
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yeah, it's a home network, and even though I work from home, not interested in paying Cisco for service. I may pull the entire HW config out and go with a good home mesh.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
It would be GR12 right? This is the Meraki GO line, there is a specific community for these products.
https://community.meraki.com/t5/Meraki-Go-Community/ct-p/go
Please, if this post was useful, leave your kudos and mark it as solved.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes, sorry I will move it to the other community
