Maximum SSID count

[Luffy]

Hi guy,

I have a question about maximum SSID in a Meraki AP.

One of my customers wants to set Meraki AP in a Hotel.

In this case, there are 30 floors in the Hotel.

Customer wants to set only a network, not many network in a Meraki organization.

I saw the SSID setting there was maximum 15 SSID in a Meraki MR.

Can I add more SSID or Should I divide more network in a Meraki organization ?

My customer wants to set SSID per floor.

In this case, it needs 30 SSID for my customer.

Is it possible ?

Thank you,

[GuyWMD]

This is a horrible idea! 

What are they actually trying to achieve. Will this be just for guest internet access or a range of other 'behind the scenes' services. Corp networks, retail, F&B etc? 

It sounds like a LOT of misconceptions need to be addressed. 

Maximum as far as I know is 15, but ideally you don't want more than 3 active. More info on that here: https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Multi-SSID_Deployment_Considerati...

[Luffy]

I think my customer will install 3 or 4 AP with floor tag and set just 1 SSID per a floor.

[Adam]

What is the benefit of having SSID's per floor?  If they are near the end of a floor or are walking between floors the experience would be more seamless if the SSID's were all just 'X Guest' etc...

[Tony_Ang · Accepted solution]

The only way to do is to setup per floor as per network.

It's not a good practice but that's the only way.

As per network you can do 15 SSID so it should be fine.

But you can make a wish in the wish tab 🙂

Regards

Tony