MR33 receiving IP via DHCP - from what source?

[ddawson100]

Is there a command similar to Windows "ipconfig /all" to find out where the IP address came from on our MR33?

[ww · Accepted solution]

No, but the gateway ip should be a dhcp server, or forward dhcp request to a dhcp server. The other option is that there is a dhcp server in the same vlan as the ap.

You could connect a pc to that switchport.

Or run a packet capture on that switchport and reboot the ap so it request dhcp again to inspect that packets

[ddawson100]

The gateway IP in this case is the firewall, not the DHCP server. I think running the packet capture would be a good way to go. Is there any way to manually get the AP to renew its IP?

[ww]

Maybe if you set a valid static ip, and then back to dhcp

[ddawson100]

Thanks. I may try that sometime.