MR20 clients cannot access LAN

[Synergy]

Hello all. Since I have installed my MR20 clients are no longer able to connect to wireless printer, or access router login page from wireless. When pinging local IPs we get the error message that "Destination net unreachable". Is this a known issue, or setting, or is it just me? Thanks!

[ww · Accepted solution]

Is your  ssid configured  in bridge  or nat mode?

https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/SSID_Modes_for_Client_IP_Assignme...

Make sure  the mr  firewall is not blocking the traffic on L2 or L3 

https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/MR_Firewall_Rules

https://documentation.meraki.com/zGeneral_Administration/Cross-Platform_Content/Using_Layer_3_Firewa...

[Synergy]

Bridge to router.

[Synergy]

Ah, yes, this fixed it, thank you!!

[Synergy]

Firewall rule was blocking access to lan.

[Jwiley78]

Ran into this a couple times.  Wireless->configure->firewall & traffic shaping.  Default is to deny.