MA-ANT-25 Antenna Not Diffusing Signal

Solved
antmich
Here to help

MA-ANT-25 Antenna Not Diffusing Signal

Hi everyone,

 

I'm currently deploying MR74 APs with the MA-ANT-25 antennas (2 per AP). Whenever i try powering up the AP, it turns green but I see no SSID in the air. It is supposed to be a survey mode AP and is connected to my battery pack.

 

Any idea of what could be wrong ?

 

Thank you very much

1 Accepted Solution
antmich
Here to help

Hi @rhbirkelund !

 

I ended up finding what the issue was. The AP was in survey mode as expected, but for some reason the broadcasted SSID was hidden ?

 

I haven't found why and couldn't configure it differently, so I just kept going my survey knowing the SSID was hidden.

View solution in original post

2 Replies 2
rhbirkelund
Kind of a big deal
Kind of a big deal

Have ensured the AP is configured in survey mode?

 

See here for instructions; https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_A...

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.
antmich
Here to help

Hi @rhbirkelund !

 

I ended up finding what the issue was. The AP was in survey mode as expected, but for some reason the broadcasted SSID was hidden ?

 

I haven't found why and couldn't configure it differently, so I just kept going my survey knowing the SSID was hidden.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels