Meraki

AdamB1 · ‎May 20 2021

Hi,

I'd like to kick multiple clients off an SSID. I know I can block them permanently under Network-wide > Clients, but I'd like to just kick them out so that they can connect again if they want to.

PhilipDAth · ‎May 21 2021

Reboot AP.

View solution in original post

DarrenOC · ‎May 21 2021

Hi @AdamB1 - there is no quick method of doing this. You could apply the Block Policy which would remove them off the network temporarily and they'd be forced to re-associate.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

PhilipDAth · ‎May 21 2021

Reboot AP.

cmr · ‎May 22 2021

Bit of a 'sledge hammer to crack a walnut' there @PhilipDAth , but undeniably effective 👍

If my answer solves your problem please click Accept as Solution so others can benefit from it.

DarrenOC · ‎May 22 2021

Agree @cmr , this sprung to mind

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

Meraki

Community

Kick clients off an SSID

Kick clients off an SSID