Increase the range of Meraki MR86

Lankem
Conversationalist

Increase the range of Meraki MR86

I have a Meraki MR86 with two MA-ANT-27 antennas. The range is poor, i have the power via a POE from a meraki MX68W, will a power injector increase the range.

11 Replies 11
ww
Kind of a big deal
Kind of a big deal

No,

Range depends on country regulations, dbm you set(can be different on different channels), what band you used, obsticals, antenna placement

cmr
Kind of a big deal
Kind of a big deal

As @ww said, check which channels you are using and what power ranges are allowed in the profile.  Some channels can broadcast a lot more powerfully than others.

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Lankem
Conversationalist

Thanks .. Do you have any examples of a channel that gives the optimum range 

cmr
Kind of a big deal
Kind of a big deal

Which country are you in and what band are you wanting to go further?

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Lankem
Conversationalist

I’m in the UK - the 5GHz would be better for the new android barcode readers 

cmr
Kind of a big deal
Kind of a big deal

UNII-1 Lower and UNII-2 Middle (5150 – 5350 MHz) - 23dBm.

 

UNII-2 Extended (5470 – 5725 MHz) - 30dBm.

If my answer solves your problem please click Accept as Solution so others can benefit from it.
cmr
Kind of a big deal
Kind of a big deal

So the UNII-2 extended band higher frequencies can go further.

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Lankem
Conversationalist

thanks I'll give it a go

PhilipDAth
Kind of a big deal
Kind of a big deal

The best way to increase the range is ... buying an additional AP.

Lankem
Conversationalist

Thanks .. I get that. But having spent nearly £2k on the system the range is less than a £200 dlink.

cmr
Kind of a big deal
Kind of a big deal

@Lankem as you have found out, professional APs don't necessarily go further than consumer ones, however there are a lot of antenna options to shape the signal if you need specific coverage.  They also have a lot more authentication options, monitoring and often handled higher client densities much better.  Unfortunately they don't just turn it up to 11.

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels