Change default settings of auto channel

ochambelant
Comes here often

Change default settings of auto channel

Hello,

 

I would like to know, please, how to change 1,6,11 default values.

 

I want, as example, perform 1,5,9,13 or 2,7,12 channels.

 

Thank you 🙂

2 Replies 2
ww
Kind of a big deal
Kind of a big deal

at radio settings 》 rf profile  you can edit the channels.

but its locked here to those 2.4ghz channels, not sure if this is something meraki support can unlock for you

drgnslyr
Getting noticed

Unless their documentation is out of date, which is possible, I don't think you can change the default values for Auto-channel on the 2.4GHz radios. Here is what I found:

  • Autochannel on 2.4 GHz only uses channels 1, 6 and 11. Administrators can remove only one of the three channels. If non-standard channels need to be used manual overrides can be done from the Overview page.

https://documentation.meraki.com/MR/Radio_Settings/RF_Profiles

 

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels