Change default settings of auto channel

[ochambelant]

Hello,

I would like to know, please, how to change 1,6,11 default values.

I want, as example, perform 1,5,9,13 or 2,7,12 channels.

Thank you 🙂

[ww]

at radio settings 》 rf profile  you can edit the channels.

but its locked here to those 2.4ghz channels, not sure if this is something meraki support can unlock for you

[drgnslyr]

Unless their documentation is out of date, which is possible, I don't think you can change the default values for Auto-channel on the 2.4GHz radios. Here is what I found:

• Autochannel on 2.4 GHz only uses channels 1, 6 and 11. Administrators can remove only one of the three channels. If non-standard channels need to be used manual overrides can be done from the Overview page.

https://documentation.meraki.com/MR/Radio_Settings/RF_Profiles