Block Mac addresses

[JuniorNetEngin]

Hi,

Im a Junior Networkengineer and i must block some Mac addresses on a specific wifi (SSID).

Could you explain me how to do that? Mac addresses are allowed to connect with other wifi's.

[Mloraditch · Accepted solution]

See here: https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Blocking_and_Allowing...

Find the client on the client page, then select different policies by connection and ssid and then block it for the SSID in question.

[MarcP]

Or:
https://community.meraki.com/t5/Wireless/Block-mac-address-in-SSID/m-p/152925#M21208

[alemabrahao]

Note: The device will still receive an IP address and will be able to resolve DNS names.

Note: The EAP exchange will still be allowed for wireless clients, and devices will be able to associate with an SSID. The block will apply to client traffic after the 4-way handshake is completed.

Blocking or Allow listing a Client 

There are two ways to allow list or block a client on the Cisco Meraki dashboard.

Note: There is a limit of 3000 clients for allow listing and 3000 clients for blocking. An error will appear when attempting to allow list or block more than 3000 clients.

Take a look at this document and consider using iPSK without Radius.

https://documentation.meraki.com/MR/Design_and_Configure/Configuration_Guides/Encryption_and_Authent...