All APs lost PoE

bluemoon61
Here to help

All APs lost PoE

I have a small home network. 

MX64 / MS120 / 4 APs: MR33/20s - all in gateway mode

All APs have simultaneously lost PoE (no lights on any of them)
Switch is up and other wired ports are up 

I just power cycled the MS that all of the MRs are homed to and one of the AP ports appears to have come up from the switch side but there is no status light on the AP in question 

5 Replies 5
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @bluemoon61 , anything reported in the events log on your dashboard?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
bluemoon61
Here to help

bunch of DAI failures 

 

been diagnosed as PoE controller failure in the MS

 

RMA on the way 

DarrenOC
Kind of a big deal
Kind of a big deal

Thank you for updating the post. I would mark your last post as Resolved as it’ll help others out in the future

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
BlakeRichardson
Kind of a big deal
Kind of a big deal

Did you have any power outages or surges in the lead up to everything going offline?

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
bluemoon61
Here to help

Funny you should ask but yes....I was working on replacing some lights and at some point there was a short that tripped out a main breaker and I had to reset it

Honestly speaking that is not the first time we have had a short like that in the house and in the past the MS has handled it gracefully but not this time 

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels