Hi fellow meraki users ,
i have a access point connected to our switch and it went down , by checking power inline status , it is showing as IEEEPD and also other access points are getting 40 watt power and this one is getting 30 watt power.
Cisco Meraki cw91661 is connected to Te1/0/20 , Could someone let us know what is the exact issue and why AP went down.
Gi1/0/11 auto off 0.0 n/a n/a 60.0
Gi1/0/12 auto on 40.0 Meraki CW9166I Clou 4 60.0
Gi1/0/13 auto off 0.0 n/a n/a 60.0
Gi1/0/14 auto off 0.0 n/a n/a 60.0
Gi1/0/15 auto on 30.0 Ieee PD 4 60.0
Gi1/0/16 auto off 0.0 n/a n/a 60.0
Te1/0/17 auto off 0.0 n/a n/a 60.0
Te1/0/18 auto off 0.0 n/a n/a 60.0
Te1/0/19 auto off 0.0 n/a n/a 60.0
Te1/0/20 auto on 30.0 Ieee PD 4 60.0
Te1/0/21 auto on 40.0 Meraki CW9166I Clou 4 60.0
Te1/0/22 auto on 40.0 Meraki CW9166I Clou 4 60.0
Te1/0/23 auto on 40.0 Meraki CW9166I Clou 4 60.0
>>>>>>>>>>>>>>
NOT ABLE TO SEE IT CDP NEIGHBOURS.
sh cdp nei
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone,
D - Remote, C - CVTA, M - Two-port Mac Relay
Device ID Local Intrfce Holdtme Capability Platform Port ID
JJ-wFF-cS01 Ten 1/1/1 136 S I WS-C3850- Gig 1/1/3
tGG-wSS-aF03 Ten 1/1/2 126 S I WS-C3650- Gig 1/1/1
eeesfsffs Ten 1/0/21 171 R S Meraki CW Port 0
ssdjjsjs Ten 1/0/24 130 R S Meraki CW Port 0
ddvdvdvfvd0 Ten 1/0/23 122 R S Meraki CW Port 0
dcvdvfdv55 Gig 1/0/12 130 R S Meraki CW Port 0
dsdvfvdvf Ten 1/0/22 178 R S Meraki CW Port 0
