Hi fellow meraki users ,    i have a access point connected to our switch and it went down , by checking power inline status , it is showing as IEEEPD and also other access points are getting 40 watt power and this one is getting 30 watt power. Cisco Meraki cw91661  is connected to Te1/0/20 , Could someone let us know what is the exact issue and why AP went down.   Gi1/0/11  auto   off        0.0     n/a                 n/a   60.0 Gi1/0/12  auto   on         40.0    Meraki CW9166I Clou 4     60.0 Gi1/0/13  auto   off        0.0     n/a                 n/a   60.0 Gi1/0/14  auto   off        0.0     n/a                 n/a   60.0 Gi1/0/15  auto   on         30.0    Ieee PD             4     60.0 Gi1/0/16  auto   off        0.0     n/a                 n/a   60.0 Te1/0/17  auto   off        0.0     n/a                 n/a   60.0 Te1/0/18  auto   off        0.0     n/a                 n/a   60.0 Te1/0/19  auto   off        0.0     n/a                 n/a   60.0 Te1/0/20  auto   on         30.0    Ieee PD             4     60.0 Te1/0/21  auto   on         40.0    Meraki CW9166I Clou 4     60.0 Te1/0/22  auto   on         40.0    Meraki CW9166I Clou 4     60.0 Te1/0/23  auto   on         40.0    Meraki CW9166I Clou 4     60.0   >>>>>>>>>>>>>>   NOT ABLE TO SEE IT CDP NEIGHBOURS. sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge                   S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone,                   D - Remote, C - CVTA, M - Two-port Mac Relay   Device ID        Local Intrfce     Holdtme    Capability  Platform  Port ID JJ-wFF-cS01     Ten 1/1/1         136              S I   WS-C3850- Gig 1/1/3 tGG-wSS-aF03     Ten 1/1/2         126              S I   WS-C3650- Gig 1/1/1 eeesfsffs                Ten 1/0/21        171              R S   Meraki CW Port 0 ssdjjsjs                  Ten 1/0/24        130              R S   Meraki CW Port 0 ddvdvdvfvd0     Ten 1/0/23        122              R S   Meraki CW Port 0 dcvdvfdv55         Gig 1/0/12        130              R S   Meraki CW Port 0 dsdvfvdvf            Ten 1/0/22        178              R S   Meraki CW Port 0     ... View more

Hi Fellow meraki users ,    CISCO-FINISAR - 1000BASE-SX: 1.3 Gbps  is  sfp  module where  isp  is  connected  and  we  are seeing  transmission errors.   Port Link Length Status Pair 1 Pair 2 Pair 3 Pair 4 49 sfp - - - - - -   while i  run  cable  tests  ,  i  am  not seeing any information of  cable test  output  here , can some one let me know is something wrong with the cable here.   please find  solar winds graph below   ... View more

i am preparing a document and require the OS version installed in devices , How to verify which OS version is used in  MS250-48FP . Is there anyway we can check this information from our dashboard. Is there any specific name for OS that is installed across the meraki devices as all devices carry same OS as per meraki website. ... View more

Hi Fellow meraki users :   continuously there are alerts being triggered by our solarwinds monitoring system , can some one help me on whats happening here with the dashboard.   8/25/2023 9:09 PM IP address of dashboard.meraki.com -  changed from 127.0.0.1 to our public ip 8/25/2023 9:08 PM IP address of dashboard.meraki.com - changed from our public ip to 127.0.0.1 8/25/2023 7:56 PM IP address of dashboard.meraki.com - changed from 127.0.0.1 to our public ip   i am not able to paste my public ip as it may not be allowed for us to post on public forums.     Alert::dashboard.meraki.com - ::127.0.0.1::Network Nodes packet loss Alert Warning::Network Data::Critical Alert Description Node Name: dashboard.meraki.com - IP_Address: 127.0.0.1 City: Region: Site Code: Device Identification: Network Data Device Type: Packet Loss : 50 % Status: Critical   what is this scenario ?   ... View more

Hi fellow users of meraki ,      we  have  a  below connection on port 12 and it is having too many tx discards. Tried  cycle port and  still seeing below output  on cable  test . what could be the reason ? Port 12: Connected to Kiwi DoorPad Troubleshooting Cable test Testing the cable attached to port 12     Port Link Length Status Pair 1 Pair 2 Pair 3 Pair 4 12 down 44.25 m OK ok ok short short ... View more