MX SOPORTA vlan dot1.q en Puertos WAN?

SOLVED
WladimirMendoza
Getting noticed

MX SOPORTA vlan dot1.q en Puertos WAN?

Hola team, buenos dias

 

Saben si los MX soportan en los puertos WAN  encapsulamiento de vlan dot1.q, tengo un cliente que quiere pasar un enlaces mpls L2L de su proveedor a su MX67, entiendo que soportan MPLS, sin embargo nos queda la duda sobre soportan en su interface WAN vlan dot1q para este tipo de enlace L2L...

1 ACCEPTED SOLUTION
alemabrahao
Kind of a big deal
Kind of a big deal

You can set a specific VLAN on WAN port.

 

 

alemabrahao_0-1683816481746.png

 

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

View solution in original post

4 REPLIES 4
KarstenI
Kind of a big deal
Kind of a big deal

Gracias por tu respuesta, esta información fue de mucha ayuda. 

alemabrahao
Kind of a big deal
Kind of a big deal

You can set a specific VLAN on WAN port.

 

 

alemabrahao_0-1683816481746.png

 

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

Thanks!!!!! 😁 this is was what i needed

Get notified when there are additional replies to this discussion.