Meraki

WladimirMendoza · ‎May 11 2023

Hola team, buenos dias

Saben si los MX soportan en los puertos WAN encapsulamiento de vlan dot1.q, tengo un cliente que quiere pasar un enlaces mpls L2L de su proveedor a su MX67, entiendo que soportan MPLS, sin embargo nos queda la duda sobre soportan en su interface WAN vlan dot1q para este tipo de enlace L2L...

alemabrahao · ‎May 11 2023

You can set a specific VLAN on WAN port.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

View solution in original post

KarstenI · ‎May 11 2023

Puede hacer esto en la pagina de estado local.

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

WladimirMendoza · ‎May 11 2023

Gracias por tu respuesta, esta información fue de mucha ayuda.

alemabrahao · ‎May 11 2023

You can set a specific VLAN on WAN port.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

WladimirMendoza · ‎May 11 2023

Thanks!!!!! 😁 this is was what i needed

Meraki

Community

MX SOPORTA vlan dot1.q en Puertos WAN?

MX SOPORTA vlan dot1.q en Puertos WAN?