meraki MS only have one vlan interface??

Solved
Snika
Getting noticed

meraki MS only have one vlan interface??

In general, a Catalyst switchs can have 4096 VLANs and VLAN interfaces.

But can meraki MS only have one vlan interface??

 

SW9.png

1 Accepted Solution
ww
Kind of a big deal
Kind of a big deal

On layer2 only switches you can assign L2 vlans just to the switch interfaces.

 

In case you want a svi on a L3 capable switch you need to enable the routing

https://documentation.meraki.com/MS/Layer_3_Switching/MS_Layer_3_Switching_and_Routing#Initializing_...

View solution in original post

2 Replies 2
KarstenI
Kind of a big deal
Kind of a big deal

Your screenshot only shows the dedicated config for the Switch-Management. But based on the Model, MS Switches can also be configured with VLANs for inter-VLAN-routing:

https://documentation.meraki.com/MS/Layer_3_Switching/MS_Layer_3_Switching_and_Routing

ww
Kind of a big deal
Kind of a big deal

On layer2 only switches you can assign L2 vlans just to the switch interfaces.

 

In case you want a svi on a L3 capable switch you need to enable the routing

https://documentation.meraki.com/MS/Layer_3_Switching/MS_Layer_3_Switching_and_Routing#Initializing_...

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels