I'm in need of help understanding and setting up VLANs on my network.
I currently have an MX68 Security & SD-WAN appliance, an MS120-8LP switch, and an MR33 access point.
I find myself getting confused regarding VLANs. 😭
Could someone please guide me with this, please? 🙏🏽 I'd appreciate it very much!!
Hi @Shadius , firstly, have a read through this document
Let’s say you want to configure a Voice and Data VLAN on your network. With your setup I would configure the VLAN interfaces on the Mx. So you would have something like:
Voice VLAN (VLan iD 10) Subnet 192.168.10.0/24, MX IP 192.168.10.1
Data VLAN (VLAN ID 20) Subnet 192.168.20.0/24, MX IP 192.168.20.1
Connect your MX to your switch via a Trunk and allow both VLANs.
on your switch allow the VLANs required on a per port basis
View all community news »