The MX95/MX105 does not come online when using auto-negotiate mode
Hi all,
Anyone encounter the following issues: How to resolve it?
The MX95/MX105 does not come online when using auto-negotiate mode. This issue occur for the secondary WAN port as well.
Our benchmark; The MX64 does come online with 1G/full auto-negotiate to the same upstream device. running firmware version MX15.44; also tested with other device Resident Gateway (RG) as a benchmark and the device successfully get online with auto-negotiate mode.
The MX95/MX105 does come online when set to 100M/full, but only gets 100M/half duplex at upstream device.
MX95 and MX105 currently running firmware version MX16.9
Welcome to the Meraki Community! To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.