Stacking MS390

SOLVED
ammahend
Getting noticed

Stacking MS390

Can I stack mix models of MS390, for e.g stack 4 switches below.

1. MS390-48-HW with no module

2. MS390-48P-HW with 4X10gig Module

3. MS390-48U-HW with 8X10Gig Module

4. MS390-24P-HW with 2X40gig Module

1 ACCEPTED SOLUTION
DarrenOC
Kind of a big deal
Kind of a big deal

Yes you can.

 

https://documentation.meraki.com/MS/Stacking/Switch_Stacks

 

You just can’t mix other Meraki switch types

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

4 REPLIES 4
DarrenOC
Kind of a big deal
Kind of a big deal

Yes you can.

 

https://documentation.meraki.com/MS/Stacking/Switch_Stacks

 

You just can’t mix other Meraki switch types

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Inderdeep
Kind of a big deal
Kind of a big deal

@ammahend : yes as all are same model, you can mix for sure !

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
PhilipDAth
Kind of a big deal
Kind of a big deal

If you haven't bought the MS390's yet - considering getting something else from the Meraki MS family (perhaps MS355).

 

The MS390's are famous for their issues with stacking bugs and bugs in general.  Google will tell you about this.

misterguitar
Getting noticed

AVOID these switches like the plague.Trust me on this. Unless you want to explain to managers why you spent vast sums of money on equipment that doesn't work. And you enjoy downtime and tons of intermittent unsolvable issues. Scan the forums here. these MS390 switches look good on paper but DO NOT WORK. DO not risk your career future by buying these defective bombs.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels