No aggregation possible with firmware MS14.21 on stacked MS425-16 to an MS225

SOLVED
redsector
Head in the Cloud

No aggregation possible with firmware MS14.21 on stacked MS425-16 to an MS225

Hello,

have got an strange problem with port aggregation from stacked MS425 switches to an MS225 switch. the MS225 gets unreachable and needs a cold reboot. This happenes with Firmware MS14.21.

With firmware MS12.33 it works as expected.

I opened a case, but they don´t understand my problem...

 

any ideas?

1 ACCEPTED SOLUTION

It was a problem with the enabled DAI ARP Inspection. It was solved with enabling the DAI on the uplink-ports.

View solution in original post

4 REPLIES 4
MarcP
Head in the Cloud

They don´t? wow... 😞

 

Does the MS225 needs a reboot from to time time or only after you updated it? Don´t have a idea, sry, but interrested.

redsector
Head in the Cloud

After update, but it can´t get a connection with aggregate to the stacked MS225-16

 

It´s running with STP and one STP-blocked port. But not with aggregate. Only running aggregated with Firmware MS12.33

I  opened an case. It´s still under investigation.

It was a problem with the enabled DAI ARP Inspection. It was solved with enabling the DAI on the uplink-ports.

View solution in original post

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels