Named VLAN on 15.x software - How / where do I configure this ?

SOLVED
thomasthomsen
A model citizen

Named VLAN on 15.x software - How / where do I configure this ?

Hi all

 

I saw that there was a named VLAN feature on the 15.x software train.

And I upgraded some switches with that software, but I cannot seem to find any new fields or meny points where I can configure this. And there does not seem to be a documentation page about it (except on a "Beta" page that requires a Meraki login 🙂 ).

 

Do I have to ask support for the feature ?

 

Thanks

Thomas

1 ACCEPTED SOLUTION

🙄I'd contact Meraki Support.  Seeing the same as yourself

 

UCcert_0-1656339731893.png

 

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

5 REPLIES 5
UCcert
Kind of a big deal

Hi @thomasthomsen 

 

There’s a previous post which mentions named VLANs using RADIUS assignment

 

https://community.meraki.com/t5/Switching/Named-VLAN-for-port-config/m-p/133469#M9864

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

Yeah I found that one, but it does not really mention anything about configuration.

And it is actually for VLAN assignment from Radius that Im looking for.

I mean, I could do it with a group policy I suppose, but that is not really the same thing as named VLAN.

So I still need some documentation and / or config guide on this.

🙄I'd contact Meraki Support.  Seeing the same as yourself

 

UCcert_0-1656339731893.png

 

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

Just to "end" this thread. Yes, you have to contact Meraki support to get the feature enabled. And Yes, it works, when returning a name for a VLAN from ISE instead of the number. So all good.

(Perhaps Ill just accept my own answer as the solution ? 🙂 )

redsector
Head in the Cloud

Would be nice to keep a VLAN list with names on the switches like on Cisco "classic" switches with the command: sh vlan

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels