cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Multi-Auth Scenarios

Highlighted
Just browsing

Multi-Auth Scenarios

Hi,

 

"With multi-auth, each connected device is required to authenticate. Multiple devices may be connected to each port. Guest VLANs are not support in this mode."

 

What happens if one of the devices is not authenticated?

 

What is the interaction between ISE, Dynamic VLAN assignment, and an access interface with a multi-auth policy. Lets say that 2 clients connect to the same interface, authenticates, and are assigned two different VLANs by ISE. What happens?

2 REPLIES 2
Kind of a big deal

Re: Multi-Auth Scenarios

Try and avoid this scenario.  Don't use hubs.  Have each device plug into an 802.1x switch port.

 

Trust me, if you value stability and you want to use 802.1x don't introduce this complexity.

Just browsing

Re: Multi-Auth Scenarios

Unfortunatly that's not a solution.

 

 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.