Multi-Auth Scenarios

Bucket
Getting noticed

Multi-Auth Scenarios

Hi,

 

"With multi-auth, each connected device is required to authenticate. Multiple devices may be connected to each port. Guest VLANs are not support in this mode."

 

What happens if one of the devices is not authenticated?

 

What is the interaction between ISE, Dynamic VLAN assignment, and an access interface with a multi-auth policy. Lets say that 2 clients connect to the same interface, authenticates, and are assigned two different VLANs by ISE. What happens?

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

Try and avoid this scenario.  Don't use hubs.  Have each device plug into an 802.1x switch port.

 

Trust me, if you value stability and you want to use 802.1x don't introduce this complexity.

Unfortunatly that's not a solution.

 

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels