Meraki compatible stacking cables......

[sambo]

If we had a better option obviously getting direct from Meraki would be best but time is not on our side and I must get these Monday but our supplier has said no....

https://www.broadbandbuyer.com/products/31356-meraki-ma-cbl-40g-50cm/?gclid=Cj0KCQiAosmPBhCPARIsAHOe...

Will these work with our new MS250's without issue?

Thanks

Sam

[DarrenOC]

They should work fine. It’s another Cisco/Meraki end of quarter so it tends to get a little crazy.

[sambo]

Also will these cables work with the MS355's also as a temp measure to stack them physically? Until we get the Meraki ones....

[DarrenOC]

Never tried stacking with just the 40G stack cable. Data sheets only show the 100G ones

MA-CBL-100G-50CM

[cmr]

I cannot imagine that the 40GB cables will work as you have to use the back ports and they are (as far as I know) hard configured to 100Gb/s.  We do have some on the bench and some 40GB cables so I can test on Monday if you can wait.

[SnackSteeler]

Stacking on the 250 is 40G. I have been using cables from fs.com for years without issue.

https://www.fs.com/products/40432.html