If we had a better option obviously getting direct from Meraki would be best but time is not on our side and I must get these Monday but our supplier has said no....
Will these work with our new MS250's without issue?
Thanks
Sam
They should work fine. It’s another Cisco/Meraki end of quarter so it tends to get a little crazy.
Also will these cables work with the MS355's also as a temp measure to stack them physically? Until we get the Meraki ones....
Never tried stacking with just the 40G stack cable. Data sheets only show the 100G ones
MA-CBL-100G-50CM
I cannot imagine that the 40GB cables will work as you have to use the back ports and they are (as far as I know) hard configured to 100Gb/s. We do have some on the bench and some 40GB cables so I can test on Monday if you can wait.
Stacking on the 250 is 40G. I have been using cables from fs.com for years without issue.
https://www.fs.com/products/40432.html