Meraki compatible stacking cables......

sambo
Getting noticed

Meraki compatible stacking cables......

If we had a better option obviously getting direct from Meraki would be best but time is not on our side and I must get these Monday but our supplier has said no....

 

https://www.broadbandbuyer.com/products/31356-meraki-ma-cbl-40g-50cm/?gclid=Cj0KCQiAosmPBhCPARIsAHOe...

 

Will these work with our new MS250's without issue?

 

Thanks

Sam

5 REPLIES 5
UCcert
Kind of a big deal

They should work fine. It’s another Cisco/Meraki end of quarter so it tends to get a little crazy.

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
sambo
Getting noticed

Also will these cables work with the MS355's also as a temp measure to stack them physically? Until we get the Meraki ones....

 

UCcert
Kind of a big deal

Never tried stacking with just the 40G stack cable. Data sheets only show the 100G ones

 

MA-CBL-100G-50CM

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
cmr
Kind of a big deal
Kind of a big deal

I cannot imagine that the 40GB cables will work as you have to use the back ports and they are (as far as I know) hard configured to 100Gb/s.  We do have some on the bench and some 40GB cables so I can test on Monday if you can wait.

SnackSteeler
Conversationalist

Stacking on the 250 is 40G. I have been using cables from fs.com for years without issue.

https://www.fs.com/products/40432.html

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels