Meraki Z4 acting as switch..

[Zero_Faction]

My Meraki Z4 is showing the switch option when I have no switches in my inventory or added? It's setup as combined. It's acting as if it is a switch.. anyone see this before?

[Mloraditch]

Its likely just a gui bug from it being in a combined network. If you split the network from your overview you can delete the other networks and it should look normal after that.

[Brash]

As @Mloraditch said, it's likely a GUI bug.

Configuration or policies applied in the switch settings won't be pushed to the Z4

[michalc]

Hi @Zero_Faction , welcome to the Meraki Community! 😊

You have most likely created your network as a combined network and you're seeing "Security SDWAN + Switching + Wireless … " which is expected and not a GUI bug as others mentioned. If you don't want to see "Switching + Wireless…" please split the network using the instructions from Splitting Combined Networks KB and than delete the unwanted networks.