the new MS390 has 3 uplink cards option.
I have a question regarding the picture on meraki site:
The option of 8x 10G Uplink module has the same image of 2x 40G.
The question is...
This image is wrong or for the 8x 10G?
it'll be available through QSPF+ breakout cable 4x 10G?
It is actually possible the image is correct. They could be using a breakout cable...
I just don't see this part listed on the Meraki page, which makes me think the image is incorrect. It's possible they're missing the breakout cable instead.
The image is just wrong.
If you look at the switch image on this page: Main MS390-48 page
You'll see the correct module inserted.
Unless its two wired ports and 6 wireless connections 😂