MS390 - uplink module

CarlosAlmeida
Here to help

MS390 - uplink module

 

Hi All,

the new MS390 has 3 uplink cards option.

 

I have a question regarding the picture on meraki site:
https://meraki.cisco.com/products/switches/accessories

The option of 8x 10G Uplink module has the same image of 2x 40G.

 

 

The question is...

b0786073-8613-49ee-91f6-8a7416a57cd8.png

 

This image is wrong or for the 8x 10G?
or

it'll be available through QSPF+ breakout cable 4x 10G?

11 REPLIES 11
jdsilva
Kind of a big deal

Re: MS390 - uplink module

Haha! Oops! That is probably the wrong image. 

 

@MeredithW someone needs to fix the website 😉

 

 

Victor3918
Conversationalist

Re: MS390 - uplink module

I noticed the same error, how can the module 8x10G have only 2 spaces for the transceiver?

jdsilva
Kind of a big deal

Re: MS390 - uplink module

It is actually possible the image is correct. They could be using a breakout cable...

 

image.png

 

https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/data_sheet_...

 

 

I just don't see this part listed on the Meraki page, which makes me think the image is incorrect. It's possible they're missing the breakout cable instead. 

CarlosAlmeida
Here to help

Re: MS390 - uplink module

Yep, I think is possible too,

but is not clear.

GIdenJoe
Kind of a big deal

Re: MS390 - uplink module

The image is just wrong.

 

If you look at the switch image on this page: Main MS390-48 page 
You'll see the correct module inserted.

MeredithW
Community Manager

Re: MS390 - uplink module

Thanks, passed this along!
Meredith W | Community Manager, Cisco Meraki


Found this helpful? Give me some Kudos! (click on the little up-arrow below) New to the community? Get started here
Roger_Beurskens
Building a reputation

Re: MS390 - uplink module

Check the Catalyst 3850 or 9300 modules 😉

 

MS390 = Cat9300 😉

PhilipDAth
Kind of a big deal

Re: MS390 - uplink module

Typically on a 9300 series switch you would use a C9300-NM-8X, which has 8 physical ports.

BlakeRichardson
Kind of a big deal

Re: MS390 - uplink module

Unless its two wired ports and 6 wireless connections 😂

Meraki CMNO, Ruckus WISE, Sonicwall CSSA, Allied Telesis CASE & CAI
Roger_Beurskens
Building a reputation

Re: MS390 - uplink module

10Gbit wireless... yes please, count me in 😄
MeredithW
Community Manager

Re: MS390 - uplink module

Fixed!

Meredith W | Community Manager, Cisco Meraki


Found this helpful? Give me some Kudos! (click on the little up-arrow below) New to the community? Get started here
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels