MS130-24P & MR46

[AY2022]

Good y'all.

I'm currently having some issue with these above 2 models.

When the MR46 are plugged into the switchports, none of MR46 power up. No lights whatsoever on the switchports / MR. Cable test seems to be good (all 4 pairs lights up and correct).

However, when the MR are plugged into a MX75, the MR power up and comes online..

Switch currently on MS16.9.

Anyone has similar setup? 

[GIdenJoe]

That means your MS130 is not supplying power to the AP's.
Make sure PoE is enabled on the ports.

[AY2022]

By default POE is already enabled.

And power usage is just 7.82 W / 370 W.

Btw it's only 3 WAPs.

Anything else to check? 

[GIdenJoe]

I know it's the default but check the port configs anyway 😉
Maybe even put them on PoE disabled and back on enabled after a minute.
You should also check on the status of the switch to see the little lightning bolts on the switchports where you connected the AP's.