MS120 with wrong static IP

SOLVED
dhutton
Here to help

MS120 with wrong static IP

Hi,

 

I have a MX120-8 configured with the wrong static IP?  Is there a easy way to access this, without it having a management port?  

1 ACCEPTED SOLUTION
redsector
Head in the Cloud

Use the reset button. Put the switch into a LAN with DHCP. After restarting the switch gets an DHCP and conncts to the dashboard. Then you can change the IP settings.

 

When you are to far abroad to push the reset button try to put the uplink where the switch is connected to into an DHCP LAN. Typically the switch tries to connect to the dashboard and if this is not working the switch tries to get an DHCP.

 

View solution in original post

4 REPLIES 4
KimStromberg
Conversationalist

I think there are only two ways of doing this. Either through local management or through the dashboard. 

 

https://documentation.meraki.com/MS/Other_Topics/Assigning_a_Static_IP_Address

Niklas2
Here to help

Hey 

 

if you have it online and you can manage it via the cloud, you can assign the static ip through the dashboard near the "LAN IP" there is a pencil, there you can change it.

 

Or you connect via Lan to the switch and go to switch.meraki.com.

 

If you disabled the local device page in "network-wide" you have to hit the reset button and assign it.

redsector
Head in the Cloud

Use the reset button. Put the switch into a LAN with DHCP. After restarting the switch gets an DHCP and conncts to the dashboard. Then you can change the IP settings.

 

When you are to far abroad to push the reset button try to put the uplink where the switch is connected to into an DHCP LAN. Typically the switch tries to connect to the dashboard and if this is not working the switch tries to get an DHCP.

 

View solution in original post

Thanks, reset seemed to be the best option

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels