cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MS120-24P - create local management SVI or interface ( separate management from Meraki Cloud)

SOLVED
Highlighted
Comes here often

MS120-24P - create local management SVI or interface ( separate management from Meraki Cloud)

Hi,

 

I'm trying to replace the Cisco 2960(branch office) with MS120P, having the 2960 has SVI 200 10.1.0.22/24 with default gateway 10.1.0.254.

 

the MS120 is will be connected to MX68, trunk ports with native 192 ( w/ internet, Meraki cloud managed) and vlan 200 as local management )

 

our HO NMS  is reaching the 10.1.0.22 to poll SNMP for monitoring.

 

I can't configure the MS120 to have separate SVI 200 for local mgmt/monitoring

 

let me know if this is possible or any other solution

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Kind of a big deal

Re: MS120-24P - create local management SVI or interface ( separate management from Meraki Cloud)

MS120 is a pure Layer 2 switch. There‘s no possibility to have SVIs on it.

 

If it‘s purely for management purposes, please take a look at https://documentation.meraki.com/MR/Monitoring_and_Reporting/Understanding_and_Configuring_Managemen...

View solution in original post

4 REPLIES 4
Highlighted
Kind of a big deal

Re: MS120-24P - create local management SVI or interface ( separate management from Meraki Cloud)

MS120 is a pure Layer 2 switch. There‘s no possibility to have SVIs on it.

 

If it‘s purely for management purposes, please take a look at https://documentation.meraki.com/MR/Monitoring_and_Reporting/Understanding_and_Configuring_Managemen...

View solution in original post

Highlighted
Kind of a big deal

Re: MS120-24P - create local management SVI or interface ( separate management from Meraki Cloud)

@CptnCrnch  is correct.  You should be using the Meraki Dashboard for your primary management.

Highlighted
Kind of a big deal

Re: MS120-24P - create local management SVI or interface ( separate management from Meraki Cloud)

Highlighted
Comes here often

Re: MS120-24P - create local management SVI or interface ( separate management from Meraki Cloud)

Thanks a lot guys, I had to configure my MS Gateway point to MX, then the MX has a static route back to my NMS.

 

Appreciate All. 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.