MS120-24P - create local management SVI or interface ( separate management from Meraki Cloud)

SOLVED
LesterMendoza
Comes here often

MS120-24P - create local management SVI or interface ( separate management from Meraki Cloud)

Hi,

 

I'm trying to replace the Cisco 2960(branch office) with MS120P, having the 2960 has SVI 200 10.1.0.22/24 with default gateway 10.1.0.254.

 

the MS120 is will be connected to MX68, trunk ports with native 192 ( w/ internet, Meraki cloud managed) and vlan 200 as local management )

 

our HO NMS  is reaching the 10.1.0.22 to poll SNMP for monitoring.

 

I can't configure the MS120 to have separate SVI 200 for local mgmt/monitoring

 

let me know if this is possible or any other solution

 

1 ACCEPTED SOLUTION
CptnCrnch
Kind of a big deal
Kind of a big deal

MS120 is a pure Layer 2 switch. There‘s no possibility to have SVIs on it.

 

If it‘s purely for management purposes, please take a look at https://documentation.meraki.com/MR/Monitoring_and_Reporting/Understanding_and_Configuring_Managemen...

View solution in original post

4 REPLIES 4
CptnCrnch
Kind of a big deal
Kind of a big deal

MS120 is a pure Layer 2 switch. There‘s no possibility to have SVIs on it.

 

If it‘s purely for management purposes, please take a look at https://documentation.meraki.com/MR/Monitoring_and_Reporting/Understanding_and_Configuring_Managemen...

@CptnCrnch  is correct.  You should be using the Meraki Dashboard for your primary management.

Thanks a lot guys, I had to configure my MS Gateway point to MX, then the MX has a static route back to my NMS.

 

Appreciate All. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels