Hi,
I'm trying to replace the Cisco 2960(branch office) with MS120P, having the 2960 has SVI 200 10.1.0.22/24 with default gateway 10.1.0.254.
the MS120 is will be connected to MX68, trunk ports with native 192 ( w/ internet, Meraki cloud managed) and vlan 200 as local management )
our HO NMS is reaching the 10.1.0.22 to poll SNMP for monitoring.
I can't configure the MS120 to have separate SVI 200 for local mgmt/monitoring
let me know if this is possible or any other solution
Solved! Go to Solution.
MS120 is a pure Layer 2 switch. There‘s no possibility to have SVIs on it.
If it‘s purely for management purposes, please take a look at https://documentation.meraki.com/MR/Monitoring_and_Reporting/Understanding_and_Configuring_Managemen...
MS120 is a pure Layer 2 switch. There‘s no possibility to have SVIs on it.
If it‘s purely for management purposes, please take a look at https://documentation.meraki.com/MR/Monitoring_and_Reporting/Understanding_and_Configuring_Managemen...
@CptnCrnch is correct. You should be using the Meraki Dashboard for your primary management.
Also check out this guide on configuring SNMP.
Thanks a lot guys, I had to configure my MS Gateway point to MX, then the MX has a static route back to my NMS.
Appreciate All.