MS120-24P - create local management SVI or interface ( separate management from Meraki Cloud)

[LesterMendoza]

Hi,

I'm trying to replace the Cisco 2960(branch office) with MS120P, having the 2960 has SVI 200 10.1.0.22/24 with default gateway 10.1.0.254.

the MS120 is will be connected to MX68, trunk ports with native 192 ( w/ internet, Meraki cloud managed) and vlan 200 as local management )

our HO NMS  is reaching the 10.1.0.22 to poll SNMP for monitoring.

I can't configure the MS120 to have separate SVI 200 for local mgmt/monitoring

let me know if this is possible or any other solution

[CptnCrnch · Accepted solution]

MS120 is a pure Layer 2 switch. There‘s no possibility to have SVIs on it.

If it‘s purely for management purposes, please take a look at https://documentation.meraki.com/MR/Monitoring_and_Reporting/Understanding_and_Configuring_Managemen...

[PhilipDAth]

@CptnCrnch  is correct.  You should be using the Meraki Dashboard for your primary management.

[PhilipDAth]

Also check out this guide on configuring SNMP.

https://documentation.meraki.com/zGeneral_Administration/Monitoring_and_Reporting/SNMP_Overview_and_... 

[LesterMendoza]

Thanks a lot guys, I had to configure my MS Gateway point to MX, then the MX has a static route back to my NMS.

Appreciate All.