MS 355

[Felix_Mugambi]

Hello guys, need help doing inter-vlan routing on ms 355.

plus i would like to ask if the switch has a command line interface?

[AjitKumar]

Hi

Hope you have gone through the following Url.

https://documentation.meraki.com/MS/Layer_3_Switching/Layer_3_Switch_Example

Meraki Switches do not have CLI.

[Felix_Mugambi]

What if i needed to set up configurations like-:

Vtp

Stp

access management in levels up to 15 

such things?

[PhilipDAth]

VTP is not needed in a Meraki world as everything is cloud orchestrated.

Spanning tree options are here:

https://documentation.meraki.com/MS/Other_Topics/Switch_Settings#Rapid_Spanning_Tree_Protocol_(STP.2...

You can control access to the Meraki cloud using Administrator accounts defined in the cloud:

https://documentation.meraki.com/zGeneral_Administration/Managing_Dashboard_Access/Managing_Dashboar...

Or you can use SAML and link it to an IDP such as ADFS or Azure AD.

https://documentation.meraki.com/zGeneral_Administration/Managing_Dashboard_Access/Configuring_SAML_...

You can use SAML roles to provide more fine grained access.

https://documentation.meraki.com/zGeneral_Administration/Managing_Dashboard_Access/Configuring_SAML_...

It sounds like you have come from the old world ... you are in for a big learning curve.

[Felix_Mugambi]

i have four vlans whose gateways are different ports on my fortigate 100d firewall. i have done inter-vlan routing on my firewall too.since switches are best and meant for switching i acquired a meraki ms 355, to do inter-vlan routing,...

I have gone through the documentation but need help and your ideas on how best i can go about it.

Thanks.

[PhilipDAth]

Follow this guide.

https://documentation.meraki.com/MS/Layer_3_Switching/Layer_3_Switch_Example

[Felix_Mugambi]

Thanks alot guys, inter-vlan routing is working...

Need help to know if meraki switches support etherchannel.

Regards.

[AjitKumar · Accepted solution]

Hi,

Meraki switches use LACP to provide Layer 2 link aggregation.

You may refer to the following Url.

https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Link_Aggregation_...