How to align VLAN 10 to VLAN 22 ?

Solved
Will-Power
Conversationalist

How to align VLAN 10 to VLAN 22 ?

I was asked to check routing to align VLAN 10 to VLAN 22 in Meraki    

 

What are the steps?

 

 

1 Accepted Solution
Leosambrana
Meraki Employee
Meraki Employee

what do you mean by align?

Routing on switches you can check at this KB

https://documentation.meraki.com/MS/Layer_3_Switching/MS_Layer_3_Switching_and_Routing

 

Routing between VLANs on MX is done by default. 

View solution in original post

3 Replies 3
Leosambrana
Meraki Employee
Meraki Employee

what do you mean by align?

Routing on switches you can check at this KB

https://documentation.meraki.com/MS/Layer_3_Switching/MS_Layer_3_Switching_and_Routing

 

Routing between VLANs on MX is done by default. 

Will-Power
Conversationalist

How can I verify route from VLAN 10 to VLAN  20 in Meraki and verify traceroute to show response.

If both VLANs are created on the switch they are directly connected networks, no additional routes are needed. The client of each VLAN knows the routes to the networks through the default gateway.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels