How to add access list in MS120-48

SOLVED
Merakibgp
Getting noticed

How to add access list in MS120-48

Hi How to add access list in MS120-48. Anyone can send me a link on this? thank you

1 ACCEPTED SOLUTION
jdsilva
Kind of a big deal

Go here:

 

https://meraki.cisco.com/support/

 

And then type "MS ACL" in the search bar. The first result should be what you're looking for.

View solution in original post

10 REPLIES 10
jdsilva
Kind of a big deal

Go here:

 

https://meraki.cisco.com/support/

 

And then type "MS ACL" in the search bar. The first result should be what you're looking for.

Thank you!

BTW, on the page, Switch ----> IPV4 ACL.

There i can see several ip addresses under "Dashboard IP address" What does that mean? 

 

jdsilva
Kind of a big deal

@Merakibgp Those are the IP addresses of the Meraki Cloud. If you create rules you want to be sure you don't block access to those specific IP blocks as your devices will be unable to contact the cloud and you cannot manage them.

PhilipDAth
Kind of a big deal
Kind of a big deal

The MS120 is a layer 2 switch. I'm not sure it supports ACLs.

jdsilva
Kind of a big deal

Oddly enough, @PhilipDAth, they do. 

You have two options.

 

Switch > Configure > ACL

 

OR 

 

Switch > Configure > Routing & DHCP

 

The MS120 series will only support the following  "This switch only supports interfaces for DHCP relay and IGMP snooping querier functionalities." 

 

You cannot setup L3 routing ACL on this model of switch. 

@BlakeRichardson

 

Isn't it Switch>IPv4 ACL or is that just a difference in our interfaces?

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
jdsilva
Kind of a big deal

@Adam Maybe it's a version thing? I have both in my dashboard in different networks...

 

image.pngimage.png

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels