- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
EoL announced for MS120 MS125 MS390 MS410 MS425 faimilies!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
MS130s replace MS120s
MS130-Xs replace MS125s
C9300-Ms replace MS390s and MS410s
C9300X-Ms replace MS425s
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hmmm sort of feels like Meraki is dropping their hardware at the higher end for Catalyst.....
@cmr Also your heading mentions MS225 however the screenshot doesn't list the MS225
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Er... fixed!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Indeed, though my C9300M testing didn't go as well as hoped...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Interested to hear about this...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@TyShawn it’s on this forum, I did it as a sort of mini blog a few weeks ago. There is some very good stuff (power stacking for example), but they don’t support non IP based DHCP options like domain name and if you press the reset button for about 5 seconds they crash and don’t recover unless you perform a factory reset on them.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This announcement makes sense but I expected it to be another year or so away to give time for the MS130 and C9300-M to 'prove themselves'.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have a feeling the 250s will happen soon.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
So now if we want to plug in a 100mbps device and see an LED indicator, we will need to buy a 200/300 series switch (since the MS130 only turns on the LED at full port speed). This seems like a downgrade in usability.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@K2_Josh which MS130 model are you seeing this on? I'm sure that the MS130-12X we have doesn't have that issue on 16.7 and we have three 100Mb devices connected to ports 3,4 and 6. Though I might need to get someone to check now...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This is from the official documentation on the MS130.
https://documentation.meraki.com/MS/MS_Overview_and_Specifications/MS130_Datasheet
Port LED is off if:
"Port is operating at less than full speed. For example:
|
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'll definitely need to get that checked visually as we also have a 1Gb device in port 10 so that should also show it...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please let us know what you find.