Do MS switches support Bonjour gateway?

mvalpreda
Here to help

Do MS switches support Bonjour gateway?

Do the MS line of switches support Bonjour gateway or broadcasting Bonjour over different subnets/VLANs? Looking to have our printers and clients on different VLANs when we do a switch refresh later this year.
 
If not, we don't have THAT many printers, so I could put them on the client VLAN.
 
Thanks for any input.
3 REPLIES 3
Inderdeep
Kind of a big deal
Kind of a big deal

@mvalpreda : Have a look i think it is for MX devices. 

https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/Bonjour_Forwarding

 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
Bruce
Kind of a big deal

I don't believe so - the link from Inderdeep is for the access points. There is bonjour forwarding support on the MR (wireless access points), and also on the MX (security appliance). This is stated on this page too, https://meraki.cisco.com/technologies/bonjour-gateway

PhilipDAth
Kind of a big deal
Kind of a big deal

No.

 

Note that if you do use another device for bonjour forwarding it doesn't usually work if the printers are on the native VLAN (usually 1).  You normally have to create a separate dedicated VLAN.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels