cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Deployment Meraki MX100 and MS250 switchs

Highlighted
New here

Deployment Meraki MX100 and MS250 switchs

Hello, We just moved to Meraki devices for our network, 1 MX100 and 8 MS250

 

What is currently setup is  each 4 switches are connected as physical stack ( 2 x 4 MS250 ) stacking cables.

 

Each stack connected to the MX100 with 1 uplink. 

 

I setup the VLANs routing on one stack and everything working as it should.

 

when I connected the 2nd stack and give one of the ports a Vlan number it took the IP and its working fine.

 

What I found that all the 2nd stack switches have RSTP enabled and passing traffic ( I think ) from the uplink of the 1st stack as its the one that have routing enabled . 

 

everything seems to be working fine but want to know what is the best way for this configuration.

2 REPLIES 2
New here

Re: Deployment Meraki MX100 and MS250 switchs

Screen Shot 2018-12-16 at 12.35.14 PM.pngThe main stack is Suite 300 and the not routed one is Suite 200
Screen Shot 2018-12-16 at 12.34.48 PM.png

Kind of a big deal

Re: Deployment Meraki MX100 and MS250 switchs

Typically I would make one switch stack the "core" switch stack. I would then connect the MX and the second switch stack to that.  I would give the "core" switch stack a spanning tree priority of 0.

 

 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.