Can you configure a loopback on MS210-24P

Solved
DBCK
Here to help

Can you configure a loopback on MS210-24P

Hi, 

 

Is it possible on an MS210-24P to configure a loopback address, I have searched but am unable to see anything so i'm either blind or it's not possible?

 

Thanks

1 Accepted Solution
DarrenOC
Kind of a big deal
Kind of a big deal

No

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

3 Replies 3
DarrenOC
Kind of a big deal
Kind of a big deal

No

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
DarrenOC
Kind of a big deal
Kind of a big deal

What are you trying to achieve?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
DBCK
Here to help

We usually route our management subnet at a loopback from the MX appliance to gain mgmt to LAN kit, the kit being catalyst switches, not Meraki ms series useually

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels