cancel
Showing results for 
Search instead for 
Did you mean: 

Missing API to change/add DHCP settings

Conversationalist

Missing API to change/add DHCP settings

Hi, 

we can change VLANs, Firewall and nearly everthing else now. But if the change the VLANS, we need to change the DHCP Settings too, or configure this initial DHCP config (relay to xxx - No DHCP- Own DHCP for each VLAN)

Or do i miss the point and that is available ? 

 

Andreas

 

6 REPLIES
Conversationalist

Re: Missing API to change/add DHCP settings

+1 for adding this to the API. Would cost us much less time for provisioning large deployments.

Highlighted
Conversationalist

Re: Missing API to change/add DHCP settings

Following up - This is a huge issue for us. We have been able to automate most of the deployment, but manual DHCP config is a significant bottleneck. When we are deploying hundreds of MXs in a short amount of time, we really need to be able to automate DHCP scope config as well.

Here to help

Re: Missing API to change/add DHCP settings

Ditto for my customers.  This seems to be a real nuisance.

 

New here

Re: Missing API to change/add DHCP settings

We are a big shop here and we really could do with an API for DHCP configuration.

Here to help

Re: Missing API to change/add DHCP settings

I'd like to see it, just to be able to get statistics from the api, so we can monitor usage to ensure that we don't run into any issues with full scopes.

New here

Re: Missing API to change/add DHCP settings

Encounter the same issue, and hunting for the solution...

Multiple VLANs creation to about 100 sites but just can't "disable DHCP server" to the VLANs.