- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Streaming via Cloud Proxy - should be on LAN
I noticed this problem earlier today and have been doing some troubleshooting.
The symbol in the bottom left of streams indicates streaming via the cloud even when on the same LAN:
I have put my laptop on the same subnet as the camera and still see the Cloud symbol.
I've done a packet trace on the switchport the camera is on with a filter expression of "host n.n.n.n", with n.n.n.n being my laptop address and no data is captured, so its deffo going via the cloud.
If I look in the Video Access menu that also says I viewed via cloud access.
Looks like something has gone wrong here as its at every site.
Solved! Go to solution.
- Labels:
-
Other
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @FeliA
Thanks for the reply.
It was due to clients using internal DNS servers, I'm in the process of correcting as per the documentation here https://documentation.meraki.com/MV/Physical_Installation/MV63_Installation_Guide#DNS_Configuration_...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @Dunky,
Is direct streaming on the LAN failing when testing with different browsers and/or different devices?
Here are a few additional things to check to help troubleshoot this issue;
- Ensure the client can reach/ping the private IP of the camera
- Remove any ACLs blocking interVLAN or intraVLAN communication between the MV and client
- Check and verify DNS resolution
- -If using custom or internal DNS servers, ensure '*.devices.meraki.direct' is allowed
- Check that TCP port 443 traffic is allowed for the TLS handshake
- Make sure cameras are running the latest stable MV firmware release
The following two documentations provide information and troubleshooting tips for direct streaming:
1. Cloud proxy vs. direct streaming
2. MV LAN Streaming Troubleshooting
If you continue to run into the LAN streaming issue, please feel free to open a case with Meraki Support to have an engineer review dashboard settings specific to your network. A support case can be opened in the dashboard by navigating to (?) help > Get Help & Cases > Pick a Tile to Contact Support > Submit a case or by following the steps provided in the Contact Cisco Meraki Support document here.
Best,
Feli
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @FeliA
Thanks for the reply.
It was due to clients using internal DNS servers, I'm in the process of correcting as per the documentation here https://documentation.meraki.com/MV/Physical_Installation/MV63_Installation_Guide#DNS_Configuration_...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @Dunky,
Awesome, glad to hear that the direct streaming issue was resolved!
Best,
Feli
