Motion alerts - Detecting rain and sending 500+ emails in one single night

Solved
SCC
Building a reputation

Motion alerts - Detecting rain and sending 500+ emails in one single night

Hi All,

 

I am having issue with setting up a motion alerts for my MV72 outdoor security cameras. As per my configuration I have a schedule from 5pm to 6am in the morning, if there is any people detection send the motion alerts.

Also, I have increased the Minimum event duration for trigger to 30seconds and Dropped Motion sensitivity for trigger to 50% but still for some reason. I am getting so many unnecessary alerts when there is a rain. I opened the support case as well with Meraki TAC and asked them the question why I am getting the alerts for rain when I have enabled the people detection. What Meraki TAC has told me that people detection is still in BETA.

 

Please let me know if someone can help me on this, so that we get the genuine alerts only after hours if there is a real people or vehicle movement as per my area of interest configured in the settings.

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

Don't use area of interest, but do have two privacy filters turned on, as was getting trigger by sunlight reflecting off two surfaces triggering the system.

 

People detection is disabled.

View solution in original post

16 Replies 16
PhilipDAth
Kind of a big deal
Kind of a big deal

I haven't had that issue.  We use the latest beta firmware.

SCC
Building a reputation

@PhilipDAth 

Then what i am doing different here. I am also using the latest BETA firmware. We are getting lots of unwanted alerts when there is a RAIN.

PhilipDAth
Kind of a big deal
Kind of a big deal

Let me have more of a play.  We use schedules as well, but perhaps we've been lucky.

SCC
Building a reputation

@PhilipDAth 

Can you please let me know how much is your minimum event duration for trigger and Motion sensitivity for trigger.

 

PhilipDAth
Kind of a big deal
Kind of a big deal

5s and 75%.  I used 75% because I basically don't want an alert unless there really is motion.

SCC
Building a reputation

@PhilipDAth 

and do you have people detection and Area of Interest enabled ?

PhilipDAth
Kind of a big deal
Kind of a big deal

Don't use area of interest, but do have two privacy filters turned on, as was getting trigger by sunlight reflecting off two surfaces triggering the system.

 

People detection is disabled.

SCC
Building a reputation

I have attached two screenshots - One people detection enabled and one people detection is disabled.

As you see when I enable the people detection my lots of unwanted alerts get dropped.

Is this not the right approach...However, in my case rain or strong wind is also generating motion alerts.

NOTE: Minimum event duration is 10seconds and Motion sensitivity for trigger 75%

 

SCC_0-1621907400429.png

 

SCC_1-1621907424594.png

 

 

 

 

SCC
Building a reputation

I was getting lots of false alerts for the movement like spider or moth movement near the camera lense even with the 5s and 75% 

Hence, Now I have enabled the people detection. So far no false alert.

I will monitor further, but I am sure as soon as there will be a rain I will get again so many false alert. it will be interesting to watch and monitor now what happens.

SCC
Building a reputation

Thanks All, After reducing the interested area its looking better now. Thanks

cmr
Kind of a big deal
Kind of a big deal

I'm seeing the same on a 72X with the latest firmware tonight.  60 alerts in less than two hours and it's not raining much.

People detection is also on and I did have 3s and 30% sensitivity.  There is literally nothing going on apart from the light rain...

1000009641.jpg

I have increased to 5s, but really not sure why it is so bad! 

If my answer solves your problem please click Accept as Solution so others can benefit from it.
cmr
Kind of a big deal
Kind of a big deal

Looks like 5s has stopped the rain emails, perhaps people only alerting doesn't work with a 3s minimum?

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Dunky
Head in the Cloud

Given that a few months have passed since you posted @cmr , are you able to confirm that you are no longer getting hundreds of emails when its raining or when the spiders/insects are active. If so would you mind sharing the settings please?

 

I have areas of interest defined, minimum event duration 5s, sensitivity 50%, alert only on people detection enabled.

 

Put it this way - I don't need a weather forecast to tell me when its raining at these sites as my phone is constantly pinging with emails!

cmr
Kind of a big deal
Kind of a big deal

@Dunky, unfortunately it is still the same.  The only thing we managed to work out so far is that it doesn't seem to be a problem when there are no cars in view of the camera.  The tech team are still working on it.

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Dunky
Head in the Cloud

Haha, given that some of my cameras cover car parks that's an issue.  I will keep an eye open to see if I can disprove that theory when it next rains.

If you click on the "Show Objects" when going to the footage from a motion alert email it does highlight the odd car as an object in motion when it most definitely isn't!

 

PhilipDAth
Kind of a big deal
Kind of a big deal

I have had this happen on an MV72X as well.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.