MV22 BLE support for Meraki sensors

Solved
rsage_voda
Getting noticed

MV22 BLE support for Meraki sensors

Hi

I have just taken delivery of a MV22 and a number of sensors MT-10, MT-12 and MT-20 my plan was to  have these connect via BLE to the MV22

I have upgraded the software on the camera from 4.8 to 4.9 despite 4.8 release announcing support for the sensors.

I can find nowhere on the dashboard under the camera for any sort of configuration.

1 Accepted Solution
rwiesmann
A model citizen

MV22 supports the sensors...see

https://meraki.cisco.com/product/sensors/indoor-sensors/mt10/

 

You need to add the license key for the sensors in Dashboard in order to have the environmental option.

hope that helps

roger

View solution in original post

4 Replies 4
rwiesmann
A model citizen

MV22 supports the sensors...see

https://meraki.cisco.com/product/sensors/indoor-sensors/mt10/

 

You need to add the license key for the sensors in Dashboard in order to have the environmental option.

hope that helps

roger

Hi

 

Thanks I claimed the Camera and sensors and license via the order number. They are on dashboard. Can't any configuration on either the sensors or the camera pages.

 

rsage_voda_0-1607533291331.png

 

Ignore that the sensors have just sprung into life.

Yes - the trick is, there is no configuration.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.