MV22 BLE support for Meraki sensors

[rsage_voda]

Hi

I have just taken delivery of a MV22 and a number of sensors MT-10, MT-12 and MT-20 my plan was to  have these connect via BLE to the MV22

I have upgraded the software on the camera from 4.8 to 4.9 despite 4.8 release announcing support for the sensors.

I can find nowhere on the dashboard under the camera for any sort of configuration.

[rwiesmann · Accepted solution]

MV22 supports the sensors...see

https://meraki.cisco.com/product/sensors/indoor-sensors/mt10/

You need to add the license key for the sensors in Dashboard in order to have the environmental option.

hope that helps

roger

[rsage_voda]

Hi

Thanks I claimed the Camera and sensors and license via the order number. They are on dashboard. Can't any configuration on either the sensors or the camera pages.

[rsage_voda]

Ignore that the sensors have just sprung into life.

[PhilipDAth]

Yes - the trick is, there is no configuration.