Meraki

SSAS

Having issues with MV 13 image pixelization. This only happens when there is lots of activity like a crowd walking down the hall. When our students change classes, the image gets pixelated terribly. Individual people walking down. The hall is fine no way you can zoom the image. I've changed the video quality from standard to mid range to ultra ultra seems to be the best but still is not very good. Any suggestions would be greatly appreciated.

alemabrahao

What are the frame rate, bit rate, and resolution settings on your cameras?

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

alemabrahao

Sorry, I forgot to mention that the frame rate is based on video quality and resolution.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

BlakeRichardson

Is the pixelation happening in the live feed, exported footage or both?

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

cmr

What do you have on this screen?

Also what firmware are you running and what speed and duplex is the connection to the switch, or is it wireless

If my answer solves your problem please click Accept as Solution so others can benefit from it.

cmr

On another note, looks like dark mode has returned for me 😎

If my answer solves your problem please click Accept as Solution so others can benefit from it.

Meraki

Community

MV Cameras

MV Cameras