MV Camera Issues - Delay and Video Wall Disconnection

[MauroF]

Hi,

I am experiencing two issues with my MV cameras:

1. There is a 5-second delay in the video feed on my Video Wall. I have a mix of MV63 and MV93 cameras. Is there e solution?
2. Is there a way it does NOT automatically disconnect the Video Wall every hour?

Thank you for your assistance.

Mauro

[cmr]

@MauroF the delay is often greater, achieving a 5 second delay is actually on the good side.  I know this doesn't help you, but the camera is sending you a recorded stream, it isn't like a traditional IP CCTV system where you can hook into the raw camera feed.

[JosRus]

On the delay, it would also be dependent on the method of streaming (direct LAN versus cloud-proxy) that is in use, as HLS cloud-proxy streaming via the browser is acknowledged to have delays similar to those stated.  

Alternatively, a review of external RTSP streaming could be good to test, to see if that makes any difference in the viewing experience. 

[PhilipDAth]

It shouldn't disconnect the video wall every hour.  Try checking the idle timeout configuration.

https://documentation.meraki.com/General_Administration/Organizations_and_Networks/Organization_Menu...

[Dunky]

If you use the Vision Portal and put it into Fullscreen mode that bypasses the global timeout setting.